I needed a place to carry tools and not take usable space inside my bags. Twisted Throttle sells a Tool Tube that's perfect to carry a few tools and can be mounted easily on the bike. The tube is plastic and waterproof. I opted to mount it on the left side right above the exhaust. It fits perfectly and does not interfere with the bag or anything I might put across the back seat since it's below the seat level.
Even though the Super Tenere has twin headlamps and they are very bright, one can never have enough light when it comes to riding at night and specially on gravel roads. There are all kinds of expensive lights out there, I would have liked to install the LED ones but I couldn't justify spending over $400 for a pair of lights. These lights will not be running lights, they are very strong and will be used mainly at night. I fabricated my own mounting brackets and bought the lights at PEP Boys.
(I should have washed the bike, it's covered in bugs)
Next I tackled the electrics. I had to install a fuse box to run all kinds of electronics. One of the best fuse boxes on the marked is made by Eastern Beaver in Japan. I had one installed on Goldie, my Kawasaki Concours, never gave me any problems and it's easy to change a blown fuse. The Tenere has all the electronics under the right side panel including the battery. 4 half turn screws and the side panel is off exposing all the electronics and fuses. Yamaha even left an empty spot for the fuse box. Had to cut a little plastic but nothing a dremel couldn't take care of. The fuse box has 6 ignition switched circuits and 2 power on all the time, an external relay supplies power when the ignition is on. The relay is mounted right under the box to the right. I left the fuse box open so you can see the internal wiring and fuses.
The fuse box powers 2 Powerlet type accessory plugs mounted on a "Highway Dirtbikes" top clamp.
One of the Powerlets has power all the time, the other is switched through the ignition. Even though they will have power when the bike is running, I can still switch them off since the power goes through 2 switches on the clamp (2 black switches). The 3rd switch (red) will power the lights and the 4th switch (red) will power the radar detector. The GPS will have power all the time so I can use it even when the bike is not running.
I installed a MadStad Adjustable Windshield Mount with Crossbar to mount the GPS and radar detector. In the picture below I had removed the windshield to do some painting on it. I will post a picture later.
I installed Handlebar Risers by SW-Motech to raise the bars by 1 inch. They give me a more upright and comfortable riding position.
The radar detector is a Bell Cobra I had in my Mustang and the GPS is a Teletype World Nav 3500 designed for motorcyclists. It's fully waterproof and routes can be imported and exported in standard formats.
More to follow.